본문 바로가기

Report

All 513,399 Page 25/51,340

검색
  • 513159

    us

    A high-temperature vibration modal testing device for variable cross-section carbon fiber resin-based composites includes triangular serrated sliding rails, high-temperature steel sliding bayonets, sliding furnace door, water-cooled conduits, dual-axis sliding rail, insulation box, infrared radiation heating array, thin armored thermocouples, observation port, tapping threaded rod, tapping threaded fixture, ceramic force transmission rod, excitation source, laser vibration measurer, vibration measuring port, mechanical pump, and exhaust valve. A variable cross-section carbon fiber resin-based composite test piece is fixed to the high-temperature steel sliding bayonets and fixed to the tapping threaded fixture by the dual-axis sliding rail. During high-temperature vibration modal testing, the infrared radiation heating array provides a high-temperature thermal environment, the excitation source connected to the tapping threaded fixture provides random vibration, and thermal model measurement is performed through the laser vibration measurer. The device can perform high-temperature vibration modal testing on variable cross-section carbon fiber resin-based composites in aerospace flight environments.
    • 출원번호 : 18931067
    • 출원인 : NANJING UNIVERSITY OF AERONAUTICS AND ASTRONAUTICS
    • 특허번호 : 12241867
    • IPC : G01N-029/04(2006.01);G01N-001/44(2006.01);G01N-029/24(2006.01);
  • 513158

    us

    Particulate deposition rate on a photolithographic mask, particularly of tin (Sn) particles produced within an EUV light source, is reduced by producing turbulence within a radiation source chamber of the EUV light source. Turbulence can be produced by changing the temperature, pressure, and/or gas flow rate within the radiation source chamber. The turbulence reduces the number of particles exiting the EUV light source which could be deposited on the photomask.
    • 출원번호 : 18931576
    • 출원인 : Chen, Jui-Chieh
    • 특허번호 :
    • IPC : G03F-007/00(2006.01)
  • 513157

    us

    An apparatus for generating electricity via thermophotovoltaic (TPV) energy conversion is described. High efficiency is obtained by introducing a material into a combustion chamber that emits bright near-monochromatic visible light upon heating. This light is then directed to fall on an array of photovoltaic (PV) cells which convert the light to electricity. Heat and infrared radiation that is not absorbed by the PV cells is returned to the combustion chamber to further improve conversion efficiency.
    • 출원번호 : 18932288
    • 출원인 : FONG, Danielle A.
    • 특허번호 :
    • IPC : H02S-010/30(2006.01);F23K-005/00(2006.01);F23K-005/14(2006.01);
  • 513156

    ja

    PROBLEM TO BE SOLVED: To stably exhibit properties such as conductivity and heat transfer, for example, as designed.SOLUTION: A spring member disposed between two bodies to be pressed facing each other in a first direction, comprises a first member, and a second member different from the first member, composed of a different material. The second member is curved or bent such that an intermediate portion in a second direction orthogonal to the first direction projects toward the other side of the first direction. The first member extends along the second member, and intersects the second member in the first direction. The first member is located in the intermediate portion in the second direction on the other side of the first direction from the second member, and also located in a portion other than the intermediate portion in the second direction on the one side in the first direction from the second member.SELECTED DRAWING: Figure 2
    • 출원번호 : 2024191027
    • 출원인 : NHK SPRING CO LTD
    • 특허번호 :
    • IPC : F16F-001/18(2006.01);H01L-023/36(2006.01);
  • 513155

    ko

    본 발명은 적어도 다음의 층 시퀀스(layer sequence)를 포함하는 다층 테이프에 관한 것이다: (a1) 발포제-함유 접착제 층; (b1) 레이저-반투명 접착제 층; (c) 금속, 금속 옥사이드, 카본 블랙 및 방사선-경화성 래커(radiation-curable lacquer)로 구성된 군으로부터 선택된 레이저-민감성 물질을 포함하는 레이저-디본딩가능 층(laser-debondable layer); 및 (b2) 레이저-반투명 접착제 층을 포함한다. 또한, 본 발명은 상기 다층 테이프를 디본딩하기 위한 공정에 관한 것이다. 또한, 본 발명은 전자 디바이스, 자동차 디바이스, 의료 디바이스 및 치과 디바이스에서의 상기 다층 테이프의 용도에 관한 것이다.
    • 출원번호 : 10-2024-7036117
    • 출원인 : 테사 소시에타스 유로파에아
    • 특허번호 :
    • IPC : C09J-007/38;C08K-003/04;C08K-003/08;C08K-003/22;C09J-011/04;C09J-005/00;C09J-007/10;C09J-007/35;
  • 513154

    ja

    PROBLEM TO BE SOLVED: To appropriately perform correction when bright burn occurs in detection means.SOLUTION: A radiation imaging apparatus has: acquisition means that acquires a radiation image photographed by detection means that detects incident radiation, and gain correction data; and gain correction means that corrects the radiation image by using the gain correction data. When bright burn in the detection means occurs, the gain correction means corrects the radiation image by using the gain correction data acquired by executing gain calibration after the occurrence of the bright burn.SELECTED DRAWING: Figure 9A
    • 출원번호 : 2024189504
    • 출원인 : CANON INC
    • 특허번호 :
    • IPC : G01N-023/04(2018.01);A61B-006/00(2024.01);
  • 513153

    us

    An ultrasonic probe of an embodiment includes a transmission and reception unit, a movable unit, a pressure signal detection unit, and an amplification unit. The transmission and reception unit includes a plurality of transducers, transmits transmission acoustic signals generated by the transducers, and receives reflection acoustic signals of the transmitted acoustic signals. The movable unit includes an acoustic radiation surface provided on a surface of the transmission and reception unit and moves due to a pressure applied to the acoustic radiation surface pressed against an object. The pressure signal detection unit detects a pressure signal corresponding to an amount of movement of the movable unit. The amplification unit amplifies the amount of movement of the movable unit.
    • 출원번호 : 18930450
    • 출원인 : CANON MEDICAL SYSTEMS CORPORATION
    • 특허번호 :
    • IPC : A61B-008/00(2006.01)
  • 513152

    us

    A loading system for a molten salt reactor system includes a slug loading assembly. The slug loading assembly includes an inert chamber having an entry port therein that is configured to receive a solid slug. The loading system further includes a chute having a pipe run extending from the entry port and elevationally below the slug loading assembly. The loading system further includes a terminal sieve fluidically coupled with the pipe run opposite the entry port and configured to receive the solid slug via the pipe run. The terminal sieve is positionable with a flow of a liquid molten salt for dissolution of the solid slug therein.
    • 출원번호 : 18930802
    • 출원인 : SCHERR, Jonathan
    • 특허번호 :
    • IPC : G21C-019/04(2006.01);G21C-001/22(2006.01);G21C-003/24(2006.01);G21C-003/28(2006.01);G21C-003/54(2006.01);
  • 513151

    us

    An energy storage system converts variable renewable electricity (VRE) to continuous heat at over 1000° C. Intermittent electrical energy heats a solid medium. Heat from the solid medium is delivered continuously on demand. An array of bricks incorporating internal radiation cavities is directly heated by thermal radiation. The cavities facilitate rapid, uniform heating via reradiation. Heat delivery via flowing gas establishes a thermocline which maintains high outlet temperature throughout discharge. Gas flows through structured pathways within the array, delivering heat which may be used for processes including calcination, hydrogen electrolysis, steam generation, and thermal power generation and cogeneration. Groups of thermal storage arrays may be controlled and operated at high temperatures without thermal runaway via deep-discharge sequencing. Forecast-based control enables continuous, year-round heat supply using current and advance information of weather and VRE availability. High-voltage DC power conversion and distribution circuitry improves the efficiency of VRE power transfer into the system.
    • 출원번호 : 18930020
    • 출원인 : O'Donnell, John Setel
    • 특허번호 :
    • IPC : F01K-003/02(2006.01);B63H-001/12(2006.01);B63H-011/00(2006.01);B63H-011/12(2006.01);B63H-011/14(2006.01);B63H-011/16(2006.01);F01K-003/08(2006.01);F01K-003/18(2006.01);F01K-011/02(2006.01);F01K-013/02(2006.01);F01K-015/00(2006.01);F01K-019/04(2006.01);F03D-009/18(2006.01);F03G-006/00(2006.01);F22B-029/06(2006.01);F22B-035/10(2006.01);F28D-020/00(2006.01);H01M-008/04007(2006.01);H01M-008/04014(2006.01);H01M-008/04029(2006.01);H02J-001/10(2006.01);H02J-003/00(2006.01);H02J-003/04(2006.01);H02M-001/00(2006.01);
  • 513150

    us

    Fatty acid mimetics are identified as modulators of nuclear receptor TLX (NR2E1) in a subject in need thereof. Methods for treating a disease or condition associated with nuclear receptor TLX (NR2E1) comprise administering a fatty acid mimetic of Formula (I), Formula (II), Formula (III), or a pharmaceutically acceptable salt thereof. Methods for modulating activity of nuclear receptor TLX (NR2E1) or for promoting neurogenesis and/or neural stem cell proliferation include contacting the fatty acid mimetic with nuclear receptor TLX (NR2E1).
    • 출원번호 : 18930348
    • 출원인 : Micalizio, Glenn C.
    • 특허번호 :
    • IPC : A61K-031/201(2006.01);G01N-033/68(2006.01);